(New Version) Passleader 70-412 PDF Exam Questions Are Best Preparation Materials To Pass Exam (41-50)

Attention: These 70-412 Exam Questions Were Updated After 2014/7/1 With The Change Of New Microsoft Exam. 100 Percent Vaild And 100 Percent Pass Ensure. Visit Our PassLeader Website And Get All Valid Exam Questions With PDF And VCE.

QUESTION 41
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and is configured as a standalone certification authority (CA). You install a second server named Server2. You install the Online Responder role service on Server2. You need to ensure that Server1 can issue an Online Certificate Status Protocol (OCSP) Response Signing certificate to Server2. What should you do?

A.    On Server1, run the certutil.exe command and specify the -setreg parameter.
B.    On Server2, run the certutil.exe command and specify the -policy parameter.
C.    On Server1, configure Security for the OCSP Response Signing certificate template.
D.    On Server2, configure Issuance Requirements for the OCSP Response Signing certificate template.

Answer: C

QUESTION 42
Your network contains an Active Directory domain named adatum.com. The domain contains a server named CA1 that runs Windows Server 2012 R2. CA1 has the Active Directory Certificate Services server role installed and is configured to support key archival and recovery. You need to ensure that a user named User1 can decrypt private keys archived in the Active Directory Certificate Services (AD CS) database. The solution must prevent User1 from retrieving the private keys from the AD CS database. What should you do?

A.    Assign User1 the Issue and Manage Certificates permission to Server1.
B.    Assign User1 the Read permission and the Write permission to all certificate templates.
C.    Provide User1 with access to a Key Recovery Agent certificate and a private key.
D.    Assign User1 the Manage CA permission to Server1.

Answer: C

QUESTION 43
Your network contains an Active Directory domain named contoso.com. The domain contains two sites named Site1 and Site2 and two domain controllers named DC1 and DC2. Both domain controllers are located in Site1. You install an additional domain controller named DC3 in Site1 and you ship DC3 to Site2. A technician connects DC3 to Site2. You discover that users in Site2 are authenticated by all three domain controllers. You need to ensure that the users in Site2 are authenticated by DC1 or DC2 only if DC3 is unavailable. What should you do?

A.    From Network Connections, modify the IP address of DC3.
B.    In Active Directory Sites and Services, modify the Query Policy of DC3.
C.    From Active Directory Sites and Services, move DC3.
D.    In Active Directory Users and Computers, configure the insDS-PrimaryComputer attribute for the users in Site2.

Answer: C

QUESTION 44
Your network contains two Active Directory forests named contoso.com and adatum.com. Contoso.com contains one domain. Adatum.com contains a child domain named child.adatum.com. Contoso.com has a one-way forest trust to adatum.com. Selective authentication is enabled on the forest trust. Several user accounts are migrated from child.adatum.com to adatum.com. Users report that after the migration, they fail to access resources in contoso.com. The users successfully accessed the resources in contoso.com before the accounts were migrated. You need to ensure that the migrated users can access the resources in contoso.com. What should you do?

A.    Replace the existing forest trust with an external trust.
B.    Run netdom and specify the /quarantine attribute.
C.    Disable SID filtering on the existing forest trust.
D.    Disable selective authentication on the existing forest trust.

Answer: C

QUESTION 45
You have four servers that run Windows Server 2012 R2. The servers have the Failover Clustering feature installed. You deploy a new cluster named Cluster1. Cluster1 is configured as shown in the following table.
451[4]
Site2 is a disaster recovery site. Server1, Server2, and Server3 are configured as the preferred owners of the cluster roles. Dynamic quorum management is disabled. You plan to perform hardware maintenance on Server3. You need to ensure that if the WAN link between Site1 and Site2 fails while you are performing maintenance on Server3, the cluster resource will remain available in Site1. What should you do?

A.    Enable dynamic quorum management.
B.    Remove the node vote for Server3.
C.    Add a file share witness in Site1.
D.    Remove the node vote for [C1] Server4 and Server5.

Answer: D


QUESTION 46
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server2 that runs Windows Server 2012 R2. You are a member of the local Administrators group on Server2. You install an Active Directory Rights Management Services (AD RMS) root cluster on Server2. You need to ensure that the AD RMS cluster is discoverable automatically by the AD RMS client computers and the users in contoso.com. Which additional configuration settings should you configure? To answer, select the appropriate tab in the answer area.
461[4]

Answer:
462[4]

QUESTION 47
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2. DC1 has the DNS Server server role installed. The network contains client computers that run either Linux, Windows 7, or Windows 8. You have a zone named adatum.com as shown in the exhibit. (Click the Exhibit button.)
471[4]
You plan to configure Name Protection on all of the DHCP servers. You need to configure the adatum.com zone to support Name Protection. Which two configurations should you perform from DNS Manager? (Each correct answer presents part of the solution. Choose two.)

A.    Change the zone type.
B.    Sign the zone.
C.    Add a DNSKEY record.
D.    Configure Dynamic updates.

Answer: D

QUESTION 48
You have a test server named Server1 that is configured to dual-boot between Windows Server 2008 R2 and Windows Server 2012 R2. You start Server1 and you discover that the boot entry for Windows Server 2008 R2 no longer appears on the boot menu. You start Windows Server 2012 R2 on Server1 and you discover the disk configurations shown in the following table.
481[2]
You need to restore the Windows Server 2008 R2 boot entry on Server1. What should you do?

A.    Run bcdedit.exe and specify the /createstore parameter.
B.    Run bootrec.exe and specify the /scanos parameter.
C.    Run bcdboot.exe d:\windows.
D.    Run bootrec.exe and specify the /rebuildbcd parameter.

Answer: D

QUESTION 49
You have a DHCP server named Server1. Server1 has one network adapter. Server1 is located on a subnet named Subnet1. Server1 has scope named Scope1. Scope1 contains IP addresses for the 192.168.1.0/24 network. Your company is migrating the IP addresses on Subnet1 to use a network ID of 10.10.0.0/16. On Server11 you create a scope named Scope2. Scope2 contains IP addresses for the 10.10.0.0/16 network. You need to ensure that clients on Subnet1 can receive IP addresses from either scope. What should you create on Server1?

A.    A multicast scope
B.    A scope
C.    A superscope
D.    A split-scope

Answer: C

QUESTION 50
Your network contains an Active Directory domain named adatum.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2. On Dc1, you open DNS Manager as shown in the exhibit. (Click the Exhibit button.)
501[5]
You need to change the zone type of the contoso.com zone from an Active Directory-integrated zone to a standard primary zone. What should you do before you change the zone type?

A.    Unsign the zone.
B.    Modify the Zone Signing Key (ZSK).
C.    Modify the Key Signing Key (KSK).
D.    Change the Key Master.

Answer: A


Click Here To Get The New Update And 100 Percent Valid & Pass 70-412 Exam Questionshttp://www.passleader.com/70-412.html

Welcome To Visit PassLeader